Command Line Interface
6-54802.1x session-timeout
This command sets the time period after which a connected client
must be re-authenticated. Use the no form to disable 802.1x
re-authentication.
Syntax
802.1x session-timeout <seconds>
no 802.1x session-timeout
seconds - The number of seconds. (Range: 0-65535)
Default
0 (Disabled)
Command Mode
Global Configuration
Example
address filter default
This command sets filtering to allow or deny listed MAC
addresses.
Syntax
address filter default <allowed | denied>
•allowed - Only MAC addresses entered as “denied” in the
address filtering table are denied.
•denied - Only MAC addresses entered as “allowed” in the
address filtering table are allowed.
Default
allowed
SMC-AP(config)#802.1x session-timeout 300
SMC-AP(config)#