SNMP Commands

Command Mode

Global Configuration

Example

SMC-AP(config)#snmp-server contact Paul

SMC-AP(config)#

Related Commands

snmp-server location (page 6-39)

snmp-server enable server

This command enables SNMP management access and also enables this device to send SNMP traps (i.e., notifications). Use the no form to disable SNMP service and trap messages.

Syntax

snmp-server enable server no snmp-server enable server

Default Setting

Enabled

Command Mode

Global Configuration

Command Usage

This command enables both authentication failure notifications and link-up-down notifications.

The snmp-server host command specifies the host device that will receive SNMP notifications.

Example

SMC-AP(config)#snmp-server enable server

SMC-AP(config)#

6-37

Page 165
Image 165
SMC Networks SMC2555W-AG manual Snmp-server enable server, Related Commands