SMC Networks SMC2555W-AG manual Snmp Commands, Snmp-server community

SNMP Commands

SNMP Commands

Controls access to this access point from management stations using the Simple Network Management Protocol (SNMP), as well as the hosts that will receive trap messages.

Command	Function	Mode	Page
snmp-server	Sets up the community access string	GC	6-35
community	to permit access to SNMP
	commands
snmp-server	Sets the system contact string	GC	6-36
contact
snmp-server	Enables SNMP service and traps	GC	6-37
enable server
snmp-server host	Specifies the recipient of an SNMP	GC	6-38
	notification operation
snmp-server	Sets the system location string	GC	6-39
location
show snmp	Displays the status of SNMP	Exec	6-40
	communications

snmp-server community

This command defines the community access string for the Simple Network Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [ro rw] no snmp-server community string

•string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 23 characters, case sensitive)

6-35