System Configuration
If the RTS threshold is set to 0, the access point never sends RTS signals. If set to 2347, the access point always sends RTS signals. If set to any other value, and the packet size equals or exceeds the RTS threshold, the RTS/CTS (Request to Send / Clear to Send) mechanism will be enabled.
The access points contending for the medium may not be aware of each other. The RTS/CTS mechanism can solve this “Hidden Node Problem.” (Range:
CLI Commands for the 802.11a Wireless Interface – From the global configuration mode, enter the interface wireless a command to access the 802.11a radio interface. Set the interface SSID using the ssid command and, if required, configure a name for the interface using the description command. Use the turbo command to enable this feature before setting the radio channel with the channel command. Set any other parameters as required. To view the current 802.11a radio settings, use the show interface wireless a command.
Enter Wireless configuration commands, one per line. |
|
| |
|
|