SMC Networks SMC2555W-AG manual SMC-APif-wireless g#select-antenna-mode right antenna

System Configuration

CLI Commands for the 802.11a Wireless Interface – From the global configuration mode, enter the interface wireless g command to access the 802.11g radio interface. Set the interface SSID using the ssid command and, if required, configure a name for the interface using the description command. You can also use the no ssid-broadcastcommand to stop sending the SSID in beacon messages. Select a radio channel or set selection to Auto using the channel command. Set any other parameters as required. To view the current 802.11g radio settings, use the show interface wireless g command.

SMC-AP(config)#interface wireless g	6-68
Enter Wireless configuration commands, one per line.
SMC-AP(if-wireless g)#description RD-AP#3	6-75
SMC-AP(if-wireless g)#ssid r&d	6-79
SMC-AP(if-wireless g)#channel auto	6-77
SMC-AP(if-wireless a)#ssid-broadcast	6-75
SMC-AP(if-wireless g)#select-antenna-mode right antenna	6-74
SMC-AP(if-wireless g)#radio-mode g	6-73
SMC-AP(if-wireless a)#transmit-power full	6-87
SMC-AP(if-wireless g)#speed 6	6-76
SMC-AP(if-wireless g)#max-association 32	6-88
SMC-AP(if-wireless g)#beacon-interval 150	6-79
SMC-AP(if-wireless g)#dtim-period 5	6-80
SMC-AP(if-wireless g)#fragmentation-length 512	6-81
SMC-AP(if-wireless g)#rts-threshold 256	6-82
SMC-AP(if-wireless g)#exit

5-48