SMC Networks SMC2555W-AG Using the Command Line Interface, Accessing the CLI, Console Connection

Chapter 6 Command Line Interface

Using the Command Line Interface

Accessing the CLI

When accessing the management interface for the SMC2555W-AG over a direct connection to the console port, or via a Telnet connection, the access point can be managed by entering command keywords and parameters at the prompt. Using the access point’s command-line interface (CLI) is very similar to entering commands on a UNIX system.

Console Connection

To access the access point through the console port, perform these steps:

1.At the console prompt, enter the user name and password. (The default user name is “admin” and the default password is “smcadmin.”) When the user name is entered, the CLI displays the “SMC Enterprise AP#” prompt.

2.Enter the necessary commands to complete your desired tasks.

3.When finished, exit the session with the “exit” command.

6-1