
Interface Commands
Example
channel
This command configures the radio channel through which the access point communicates with wireless clients.
Syntax
channel <channel auto>
•channel - Manually sets the radio channel used for communications with wireless clients. (Range: 802.11a - 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 for normal mode, and 42, 50, 58, 152, 160 for turbo mode; 802.11g - 1 to 11)
•auto - Automatically selects an unoccupied channel (if available). Otherwise, the lowest channel is selected.
Default Setting
Automatic channel selection
Command Mode
Interface Configuration (Wireless)
Command Usage
•The available channel settings are limited by local regulations, which determine the number of channels that are available.
•When multiple access points are deployed in the same area, be sure to choose a channel separated by at least four channels for 802.11a to avoid having the channels interfere with each other, and at least five channels for 802.11b/g. You can deploy up to four access points in the same area for 802.11a (e.g., channels 36, 56, 149, 165) and three access points for 802.11b/g (e.g., channels 1, 6, 11).