
Initial Configuration
• 802.11b/g
802.11g Radio Channel: Set the operating radio
channel number. (Range:
Note: Available channel settings are limited by local regulations which determine which channels are available. (See “Maximum Channels” on page
3.IP Configuration – Either enable or disable Dynamic Host Configuration Protocol (DHCP) for automatic IP configuration. If you disable DHCP, then manually enter the IP address and subnet mask. If a management station exists on another network segment, then you
must enter the IP address for a gateway that can route traffic between these segments. Then enter the IP address for the primary and secondary Domain Name Servers (DNS) servers to be used for
DHCP Client – With DHCP Client enabled, the IP address, subnet mask and default gateway can be dynamically