Toshiba IK-WR05A System Logs, Log server settings, System log, Select Enable remote log

System > Logs

Advanced Mode

This section explains how to configure the Network Camera to backup the system log to a remote server.

Log server settings

Follow the steps below to set up the remote log:

1.Select Enable remote log.

2.In the IP address text box, enter the IP address of the remote server.

2.In the port text box, enter the port number of the remote server.

3.When completed, click Save to enable the setting.

You can configure the Network Camera to send the system log file to a remote server as a log message. When using this feature, the appropriate syslog server is required for receiving the system log message from the Network Camera.

System log

This column displays the system log in chronological order. The system log is stored in the Network Camera’s buffer and dated events will be overwritten when the number of events reaches a limit.

The system log messages stored in the Network Camera will be all cleared after reboot or power down the Network Camera.

36