USING MULTI-ZONE CONFIGURATION
This unit allows you to configure a
Only analog signals are sent to the second and third rooms. Any source you want to listen to in the second or third room must be connected using the analog (AUDIO L/R) input jacks on this unit.
Connecting the Zone 2 and Zone 3 components
You need the following additional equipment to use the
•An infrared signal receiver in the second and/or third room.
•An infrared emitter in the main room. This emitter transmits the infrared signals from the remote control in the second and/or third room to the main room (to a CD player or DVD player, for example).
•An amplifier and speakers for the second and/or third room.
y
•You do not need an extra amplifier and speakers for the second and/or third room if you want to use the internal amplifiers of this unit.
•Since there are many possible ways to connect and use this unit in a
REMOTE |
| REMOTE |
| REMOTE |
| REMOTE | ||
IN |
| OUT | IN |
| OUT | IN |
| OUT |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
Infrared signal | This unit |
|
| YAMAHA |
| YAMAHA | ||
receiver |
|
|
| component |
| component | ||
■Using external amplifiers
To use an external amplifier in Zone 2 or Zone 3, connect the external amplifier to ZONE OUT terminals and select “EXT” in “ZONE2 AMP” or “ZONE3 AMP” (see page 93).
ZONE 3 AUDIO OUT
ZONE 2 AUDIO OUT
| SP OUT |
MONITOR OUT | |
DVD player | This unit |
(or other component) | MAIN |
VIDEO IN | SYSTEM ZONE 3 |
ZONE 2 | |
AUDIO IN |
|
Infrared emitter | |
Main room | |
(Main zone) | |
REMOTE OUT
Amplifier
Remote control
Infrared signal receiver
Second room
(Zone 2)
REMOTE IN
Amplifier
Remote control
Infrared signal receiver
Third room
(Zone 3)
REMOTE IN
Notes
•Adjust the Zone 2/Zone 3 volume by using the amplifier in the second/third room when “ZONE2 VOL” or “ZONE3 VOL” are set to “FIX” (see page 93).
•To avoid unexpected noise, DO NOT use the Zone 2/Zone 3 feature with CDs encoded in DTS.
