Opening and closing the front panel Door | Yamaha RX-V1700 specification

7MULTI ZONE buttons

ZONE 2 ON/OFF

Turns on Zone 2 only or sets it to the standby mode. See page 107 for details.

ZONE 3 ON/OFF

Turns on Zone 3 only or sets it to the standby mode. See page 107 for details.

Note

These buttons are operational only when MASTER ON/OFF is pressed inward to the ON position.

ZONE CONTROLS

Switches the zone you want to control between the main zone, Zone 2 and Zone 3. See page 107 for details.

After you press ZONE CONTROLS, the indicator for the currently selected zone flashes in the front panel display for approximately 5 seconds. While the indicator is flashing, perform the desired operation.

8Front panel display

Shows information about the operational status of this unit (see page 10).

9ENHANCER

Turns on or off the Compressed Music Enhancer mode (see page 52).

0Remote control sensor

Receives signals from the remote control (see page 9).

ANIGHT

Turns on or off the night listening modes (see page 53).

BPURE DIRECT

Turns on or off the Pure Direct mode (see page 50).

CONTROLS AND FUNCTIONS

CPROGRAM selector

•Selects sound field programs (see page 44).

•Adjusts the bass/treble balance in conjunction with TONE CONTROL (see page 50).

DOPTIMIZER MIC jack

Use to connect and input audio signals from the supplied optimizer microphone in the “AUTO SETUP” procedure (see page 32).

E PHONES jack

Outputs audio signals for private listening with headphones (see page 41).

FVIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console or a video camera (see page 27).

To reproduce the source signals input at these jacks, select “V-AUX” as the input source.

Note

The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.

GVOLUME

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.