CUSTOMIZING THIS UNIT (MANUAL SETUP)
Notes
•“CENTER”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”, “PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP” (see page 81), “SUR. L/R SP” (see page 81), “SB L/R SP” (see page 82), “LFE/BASS OUT” (see page 80) and “PRESENCE SP” (see page 82) are set to “NONE” respectively.
•Instead of “SB L” and “SB R”, “SB” is displayed if “SB L/R SP” is set to either “SMLx1” or “LRGx1” (see page 82).
■Test tone D)TEST TONE
Turns the test tone output on or off for the SPEAKER SET, SP LEVEL and SP DISTANCE settings. Choices: ON, OFF
D)TEST TONE
TEST TONE;;;;OFF
[) | ) |
y
If you use a handheld sound pressure level meter, hold at arm’s length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB.
Notes
•This function is automatically turned off if you exit “BASIC MENU”.
•If you select “ON” and enter the “SPEAKER SET”, “SP LEVEL” or “SP DISTANCE” menu, the test tone is output from
the selected speakers.
2 SOUND MENU
Use to manually adjust speaker settings or compensate for video signal processing delays when using LCD monitors or projectors. Most of the SOUND MENU parameters are set automatically when you run AUTO SETUP (see page 32).
2 SOUND MENU 1/2 | 2 SOUND MENU 2/2 | ||
. A)EQUALIZER | . E)HDMI SET | ||
B)LFE LEVEL |
|
| |
C)DYNAMIC RANGE |
|
| |
D)AUDIO SET |
|
| |
p | p | p | p |
■Equalizer A)EQUALIZER
Use this feature to select the parametric equalizer or the graphic equalizer.
Equalizer select SELECT
Use this feature to select the type of equalizer. Choices: AUTO PEQ, GEQ, EQ OFF
A)EQUALIZER
SELECT;;;;;;;
) | ) |
•Select “AUTO PEQ” to use the parametric equalizer adjusted in “AUTO SETUP” (see page 32).
•Select “GEQ” to adjust the
•Select “EQ OFF” to deactivate the equalizing feature.
Note
You can select “AUTO PEQ” only when you carry out “AUTO SETUP” in advance (see page 32). In this case, “AUTO PEQ” is automatically selected as the default setting.
