Selecting the MULTI CH INPUT component
Use this feature to select the component connected to the MULTI CH INPUT jacks (see page 26) as the input source.
Rotate the input selector on the front panel to select MULTI CH INPUT (or MULTI CH IN on the remote control).
INPUT
MULTI CH IN
or
Front panel | Remote control |
PLAYBACK
Using your headphones
Connect a pair of headphones with a stereo analog audio cable plug to the PHONES jack on the front panel.
PURE DIRECT
VOLUME
CONTROL |
|
|
|
| FM/AM | MEMORY |
|
A/B/C/D/E |
|
|
| MAN'L/AUTO FM | ENHANCER | ||
INPUT |
|
|
| EDIT |
|
|
|
|
|
|
|
|
|
| |
| STRAIGHT |
|
|
| ZONE ON/OFF ZONE CONTROLS | ||
MAIN ZONE |
|
| MULTI ZONE |
|
|
| |
| EFFECT |
|
|
| ZONE 2 | ZONE 3 |
|
ON/OFF | YPAO | SILENT CINEMA | S VIDEO | VIDEO | L AUDIO | OPTICAL | |
PROGRAM | OPTIMIZER | PHONES |
|
| VIDEO AUX |
| |
| MIC |
|
|
| |||
MASTER
y | y | |
Use “MULTI CH SET” menu in “INPUT MENU” to set the | ||
When you select a sound field program, SILENT CINEMA mode | ||
parameters for MULTI CH INPUT (see page 89). | ||
activates automatically (see page 49). | ||
|
Note
Sound field programs and the Compressed Music Enhancer mode cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source and Audio input jack select is set to “ANALOG” (see page 40).
Notes
•When you connect headphones, no signals are output at the speaker terminals.
•When the component connected to the MULTI CH INPUT jacks of this unit is selected as the input source and Audio input jack select is set to “ANALOG” (see page 40), only the signals input at FRONT jacks are output from the connected headphones.
•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.
Muting the audio output
Press MUTE on the remote control to mute the audio output. Press MUTE again to resume the audio output.
MUTE
y
•You can also rotate VOLUME on the front panel or press VOLUME +/– on the remote control to resume the audio output.
•You can adjust the muting level by using the “MUTE TYPE” parameter in “SOUND MENU” (see page 86).
•The MUTE indicator flashes in the front panel display when the audio output is muted and disappears from the front panel display when the audio output is resumed.
English
