Yamaha RX-V1700 Setting remote control ID, 112 En, Bi-AMP BI-AMP, Video reset Video Reset

ADVANCED SETUP

■Bi-AMP BI-AMP

Use to activate or deactivate the bi-AMP function. Choices: ON, OFF

•Select “ON” if you want to activate the bi-AMP function.

•Select “OFF” if you want to deactivate the bi-AMP function.

Note

When BI-AMP is set to ON, the SURROUND BACK terminals cannot be used to connect surround back speakers in that the SURROUND BACK terminals are already used for the bi-AMP connection (see page 17).

■ Video reset VIDEO RESET

Use to initialize the parameter settings for “DISPLAY SET” in “OPTION MENU” (see page 90).

Choices: YES, CANCEL

Note

The parameter setting for “DIMMER”, “SHORT MESSAGE”, “ON SCREEN” and “FL SCROLL” is not initialized (see page 90).

Setting remote control ID

When using multiple YAMAHA receivers/amplifiers, you may be able to operate the other components simultaneously with the default code setting. In this case, set one of the alternative codes to operate this unit separately.

■Setting remote control AMP ID

1Set the operation mode selector to AMP or

SOURCE.

AMP	AMP
SOURCE	SOURCE
	or
TV	TV

2Press and hold LEARN for about 3 seconds using a ballpoint pen or similar object and then press l / h repeatedly until “L;AMP” appears in the display window on the remote control.

PRESET/CH

LEARN

ENTER

A/B/C/D/E

Notes

•Be sure to press and hold LEARN for at least 3 seconds, otherwise the learning process will start.

•If you do not complete each of the following steps within 30 seconds, the setting mode will be automatically canceled. In this case, start over from step 1.

3Press ENTER.

The four-digit code set for the selected input area appears in the display window on the remote control.

PRESET/CH

ENTER

A/B/C/D/E

112 En