
CUSTOMIZING THIS UNIT (MANUAL SETUP) |
|
■ Audio settings D)AUDIO SET | ■ HDMI set E)HDMI SET |
Use this feature to adjust the overall audio settings of this unit.
Use this feature to select the component to play back HDMI audio signals.
D)AUDIO SET
.MUTE TYPE;;;FULL
A.DELAY;;;;;;0ms
TONE BYPASS;AUTO
LE>E
p | p |
p[
Muting type MUTING TYPE
Use this feature to adjust how much the mute function reduces the output volume (see page 41).
Choices: FULL,
•Select “FULL” to completely mute all the audio output.
•Select
Audio delay AUDIO DELAY
Use this feature to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.
Control range: 0 to 240 ms
Control step: 1 ms
Tone bypass TONE BYPASS
Use this feature to select whether the audio output bypasses the tone control circuitry when “TREBLE” and “BASS” are set to 0 dB (see page 50).
Choices: AUTO, OFF
•Select “AUTO” if you want the signals to bypass the tone control circuitry to provide the purest signal possible.
•Select “OFF” if you do not want the signals to bypass
the tone control circuitry.
E)HDMI SET
SUPPORT AUDIO:
[p [
Support audio SUPPORT AUDIO
Use to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.
Choices:
•Select
•Select “OTHER” to play back HDMI audio signals on another HDMI component connected to the HDMI OUT jack.
Note
The HDMI video signals input at the HDMI IN 1 or HDMI IN 2 jack of this unit are always output at the HDMI OUT jack of this unit.