FM/AM TUNING |
| ||
|
| ||
Automatic preset tuning |
|
| |
3 Press and hold MEMORY for more than 3 | |||
You can use the automatic preset tuning feature to store up | seconds. | ||
The preset station number as well as the MEMORY | |||
to 40 FM stations with strong signals (A1 to E8: 8 preset | |||
and AUTO indicators flashes. After approximately 5 | |||
station numbers in each of the 5 preset station groups) in | |||
seconds, automatic presetting starts from the current | |||
order. You can then recall any preset station easily by | |||
frequency and proceeds toward higher frequencies. | |||
selecting the preset station number. | |||
| |||
PURE DIRECT
VOLUME
CONTROL |
|
|
|
| FM/AM | MEMORY |
|
A/B/C/D/E |
|
|
| MAN'L/AUTO FM | ENHANCER | ||
INPUT |
|
|
| EDIT |
|
|
|
| STRAIGHT |
|
|
| ZONE ON/OFF ZONE CONTROLS | ||
MAIN ZONE |
|
| MULTI ZONE |
|
|
| |
| EFFECT |
|
|
| ZONE 2 | ZONE 3 |
|
ON/OFF | YPAO | SILENT CINEMA | S VIDEO | VIDEO | L AUDIO | OPTICAL | |
PROGRAM | OPTIMIZER | PHONES |
|
| VIDEO AUX |
| |
| MIC |
|
|
| |||
MASTER |
|
|
|
|
|
|
|
1 | 2 | 3 |
MEMORY
MAN'L/AUTO FM
A1:FM 97.70MHz AUTO MEMORY
Flashes | Flashes |
1Rotate the INPUT selector to select “TUNER” as the input source.
INPUT
Front panel
2Press FM/AM to select “FM” as the reception band.
“FM” appears in the front panel display.
When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station.
y
•You can specify the preset number from which this unit stores FM stations. Press A/B/C/D/E and then PRESET/ TUNING/CH l / h repeatedly after you perform step 3 to select the preset station number under which the first station will be stored.
•You can begin tuning toward lower frequencies to store FM stations automatically. Press PRESET/TUNING so that the colon (:) disappears from the front panel display and then press PRESET/TUNING l after pressing and holding MEMORY for more than 3 seconds.
Notes
FM/AM
FM
•Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.
•If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the available stations.
•Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune into it manually and store it as described in “Manual preset tuning” on page 59.
•Only radio data system broadcasting stations are stored automatically by automatic preset tuning.
