
■Volume Trim C)VOLUME TRIM
Use this feature to adjust the level of the signal input at each jack. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources.
Choices: TUNER, PHONO, CD,
Control range:
Control step: 0.5 dB
Initial setting: 0.0 dB
C)VOLUME TRIM
;;;0.0dB
;;;0.0dB
;;;0.0dB
;;;0.0dB
p | p |
p[
y
This parameter also affects the signals output at ZONE OUT jacks.
■Decoder mode D)DECODER MODE
Use to switch the input mode. You can designate the reassigned digital input jacks for specific audio signals (DTS, etc.).
Choices: AUTO, DTS
D)DECODER MODE
.CD ;;;;AUTO DVD ;;;;AUTO DTV ;;;;AUTO
CBL/SAT ;;;;AUTO
p | p |
p | [ |
• Select “AUTO” if you want this unit to automatically detect input signal types and select the appropriate input mode.
• Select “DTS” if you want this unit to select DTS as the input mode.
CUSTOMIZING THIS UNIT (MANUAL SETUP)
■Multi channel input Setup
E)MULTI CH SET
Use to set the direction of the signals input into the center, subwoofer and surround channels when a source component is connected to the MULTI CH INPUT jacks. If you input
E)MULTI CH SET
.BGV;;;;;;;;;LAST INPUT ;;;;;6CH
p | p |
p[
BGV BGV
Use this feature to select the video source played in the background of the sources input from the MULTI CH INPUT jacks.
Choices: DVD, DTV, CBL/SAT, VCR 1, DVR/VCR 2,
•Select “LAST” to set this unit to automatically select the last selected video source as the background video source.
•Select “OFF” to set this unit not to play the video source in the background.
Input channels INPUT CH
Use this setting to select the number of channels input from an external decoder.
Choices: 6CH, 8CH
•Select “6CH” if you input
•Select “8CH” if you input
Note
If “ZONE2 AMP” is set to “[SP1]”, “[SP2]” or “BOTH” (see page 93), no sound is output from the surround back speakers even if you select “8CH”. In this case, select “6CH” and set the output setting of the external component to 6 channels.
Front input FRONT
OPERATION | ADVANCED |
|
|
E)MULTI CH SET
BGV;;;;;;;;;LAST
;;;;;8CH
.;;;;;;;;DVD
p | p |
p[
If you selected 8ch in “INPUT CH”, you can select the analog jacks at which the front signals from an external decoder will be input.
Choices: MD/TAPE,
Note
“FRONT” parameter appears only when you set “INPUT CH” to “8CH”.
English