Yamaha RX-V1700 owner manual Sound Field Programs, Selecting sound field programs, 44 En

SOUND FIELD PROGRAMS

This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from almost any stereo or multi-channel sound source. This unit is also equipped with a YAMAHA digital sound field processing (DSP) chip containing several sound field programs which you can use to enhance your playback experience.

y

•When you set the “DECODER MODE” parameter in “INPUT MENU” to “AUTO”, this unit selects the appropriate digital decoder according to the input signal.

•The YAMAHA CINEMA DSP modes are compatible with all Dolby Digital, DTS, and Dolby Surround sources.

•The YAMAHA HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from the front, back, left and right.

•You can change sound field parameters. See page 69 for details.

Selecting sound field programs

Notes

•When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.

•Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 41) and Audio input jack select is set to “ANALOG” (see page 40).

•When you play back DSD sources with any sound field program, this unit converts the DSD signals to PCM signals and then applies the selected program.

•When you play back DTS 96/24 sources with any sound field program, this unit applies the selected program without activating the DTS 96/24 decoder.

•Sampling frequencies higher than 48 kHz are sampled down to 48 kHz or lower and then sound field programs are applied.

■ Front panel operations ■ Remote control operations

PURE DIRECT

VOLUME

CONTROL				TUNING	FM/AM	MEMORY
	A/B/C/D/E					MAN'L/AUTO FM	ENHANCER
INPUT				EDIT
	STRAIGHT				ZONE ON/OFF ZONE CONTROLS
MAIN ZONE			MULTI ZONE
	EFFECT				ZONE 2	ZONE 3
ON/OFF	YPAO	SILENT CINEMA	S VIDEO	VIDEO	L AUDIO		OPTICAL
PROGRAM	OPTIMIZER	PHONES		VIDEO AUX
	MIC

MASTER

PROGRAM selector

+	+	+	AMP
			SOURCE
TV VOL	CH	VOLUME
–	–	–	TV
TV MUTE	TV INPUT	MUTE
LEVEL	PRESET/CH	SET MENU	PURE DIRECT
TITLE		MENU
BAND		SRCH MODE
	ENTER		AUDIO
A/B/C/D/E		PARAMETER
			STRAIGHT
RETURN		DISPLAY
			EFFECT
CLASSICAL	LIVE/CLUB	ENTERTAIN	MOVIE
1	2	3	4
STEREO	SUR. DECODE	SELECT	EXTD SUR.
5	6	7	8

NIGHT ENHANCER

9 0 +10 ENT

AMP

Sound field program selector buttons

Rotate the PROGRAM selector on the front panel.

The name of the selected sound field program appears in the front panel display and in the OSD.

Set the operation mode selector to AMP and then press one of the sound field program selector buttons on the remote control repeatedly.

The name of the selected sound field program appears in the front panel display and in the OSD.

44 En