■Clearing a macro function
You can clear the function programmed for a certain macro button.
1Set the operation mode selector to AMP or SOURCE and then press MACRO using a ballpoint pen or similar object.
“MCR ?” appears in the display window on the remote control.
AMP
SOURCE
TV
or | MACRO |
|
AMP
SOURCE
TV
Note
If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, start over from step 1.
REMOTE CONTROL FEATURES
2Press and hold CLEAR using a ballpoint pen or similar object, then press the macro button you want to clear for about 3 seconds.
“C;OK” appears in the display window on the remote control if clearing was successful.
CBL/SAT | MD/TAPE | ||
DTV | VCR 1 | DVR/VCR 2 | DVD |
OFF ON MACRO LEARN CLEAR RENAME
y
•If you continuously want to clear another function, repeat step 2.
•Once you clear a programmed function, the button reverts to the factory setting (or to the manufacturer setting if you have set remote control codes).
3Press MACRO again to exit the macro programming mode.
Notes
•“C;NG” appears in the display window on the remote control if clearing was unsuccessful. In this case, start over from step 2.
•“ERROR” appears in the display window on the remote control if you press more than one button simultaneously.
OPERATION | ADVANCED |
|
|
English
