CONNECTIONS
Connecting other components
CAUTION
Do not connect this unit or other components to the AC power supply until all connections between components are complete.
Notes
•When “V CONV.” is set to “OFF” (see page 90), be sure to make the same type of video connections as those made for your TV (see page 21). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.
•When “V CONV.” is set to “ON” (see page 90), the converted video signals are output only at the MONITOR OUT jacks. When recording a source, you must make the same type of video connections between each component.
•To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT” (see page 87).
•If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is given to the signals input at the DIGITAL INPUT (COAXIAL) jack.
•The parameter displays do not appear when the component video signals with 720p, 1080i or 1080p are input.
•The parameter and short message displays do not appear when the component video signals with 480p/576p, 720p, 1080i or 1080p resolutions are input and output at the VIDEO or S VIDEO MONITOR OUT jacks.
■Connecting a DVD player
| DVD player |
HDMI out | Optical out |
| |
Coaxial out | Audio out |
|
Component out
Video out
C PRPBYS
V
R L O
HDMI |
IN 1 |
DVD |
COMPONENTVIDEO | VIDEO |
A DVD | DVD |
Y |
|
PB |
|
PR | L |
| R |
|
| DIGITAL INPUT |
|
| COAXIAL |
2 | DVD | 5 DVD |
OPTICAL
indicates recommended connections
indicates alternative connections
