INPUT
or
AMP |
|
|
|
|
| PHONO | TUNER | CD | MULTI CH IN |
SOURCE | CBL/SAT | MD/TAPE | ||
| ||||
TV | DTV | VCR 1 | DVR/VCR 2 | DVD |
Select TUNER as the input source to use the TUNER features in the selected zone. For details about the TUNER operations, see “FM/AM TUNING” on page 54.
Note
The selected input source is shared across all zones.
y
You must complete this step within 5 seconds while the selected zone flashes in the front panel display. Otherwise, the currently selected zone mode is automatically canceled. In this case, press ZONE CONTROLS on the front panel again.
■Adjusting the volume level of Zone 2 or Zone 3
Rotate VOLUME on the front panel (or press VOLUME +/– on the remote control) to adjust the volume level of the selected zone.
VOLUME
+
or VOLUME
–
y
Press MUTE on the remote control to mute the sound output to the selected zone.
Note
When you use the external amplifiers in Zone 2 or Zone 3, VOLUME +/– can be used only when “ZONE2 VOL” or “ZONE3 VOL” is set to “VAR” in “ZONE SET” (see page 93).
USING
■Adjusting the balance of the speaker level in Zone 2 or Zone 3
Press TONE CONTROL repeatedly to select “BALANCE” and then rotate PROGRAM on the front panel to adjust the balance of the front left and right speaker level of the selected zone.
TONE
CONTROL
PROGRAM
■Adjusting the tonal quality of Zone 2 or Zone 3
Set the operation mode selector to AMP and then press CH +/– on the remote control to adjust the
TV VOL +/– to adjust the
+
TV VOL
–
AMP
BASS
SOURCE
TV
+
CH
–
TREBLE
y
You can also adjust the tonal quality of Zone 2 or Zone 3 by using TONE CONTROL on the front panel. For details, see “Adjusting the tonal quality” on page 50.
Note
Check that “ZONE 2” or “ZONE 3” is displayed in the display window of the remote control before you adjust the tonal quality of the corresponding zone (see page 108).
OPERATION | ADVANCED |
|
|
English
