Yamaha RX-V1700 Macro ON/OFF, Standby, Power, Audio SEL, Sleep, Multi CH, Amp, Source, Volume +

0MACRO ON/OFF

Turns on or off the macro function (see page 100).

AMACRO

Programs a series of operations to be controlled with a single button (see page 100).

BSTANDBY

Sets the main zone to the standby mode (see page 31).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

CPOWER

Turns on the main zone (see page 31).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

DAUDIO SEL

Toggles the priority for the type of audio input jack between “AUTO”, “HDMI”, “COAX/OPT” and “ANALOG” when one component is connected to two or more input jacks (see page 40).

ESLEEP

Sets the sleep timer (see page 43).

FMULTI CH IN

Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. (see page 41).

GSELECT k / n

Selects another input source that you can control independently of the input source selected with the input selector buttons.

HOperation mode selector

Selects the operation mode of the remote control buttons in the shaded area.

AMP

Operates the amplifier function of this unit.

SOURCE

Operates the component selected with an input selector button (see page 95).

TV

Operates the TV assigned to either DTV or PHONO (see page 94).

Notes

•To set the remote control codes for other components, see page 96.

•When you set the remote control codes for both DTV and PHONO (see page 96), priority is given to the one set for DTV.

CONTROLS AND FUNCTIONS

IVOLUME +/–

Increases or decreases the volume level.

JMUTE

Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 41).

KPURE DIRECT

Turns on or off the pure direct mode (see page 50).

LSET MENU

Enters “SET MENU” (see page 79).

MPARAMETER

Displays sound field parameter settings in the on-screen display (OSD) (see page 69).

NSTRAIGHT

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 49).

OEXTD SUR.

Switches between 5.1 and 6.1/7.1-channel playback of multi-channel sources (see page 73).

PSELECT

Selects decoders for 2-channel sources (see pages 73 and 75).

QENHANCER

Turns on or off the Compressed Music Enhancer mode (see page 52).

RNIGHT

Turns on or off the night listening modes (see page 53).

SRENAME

Changes the name of the input source in the display window (see page 99).

TCLEAR

Clears remote control functions acquired from the learn, macro and/or rename features (see page 103).

ULEARN

Programs remote control codes of functions from other remote controls (see page 98).

INTRODUCTION

English

7 En