
■Zone set F)ZONE SET
F)ZONE SET
.ZONE2 VOL;;;;VAR ZONE3 VOL;;;;VAR ZONE2 AMP;;;;EXT ZONE3 AMP;;;;EXT
p | p |
p | [ |
Zone 2 volume ZONE2 VOL
Zone 3 volume ZONE3 VOL
Use to select how the volume control will operate with regard to the ZONE 2 OUTPUT or ZONE 3 OUTPUT jacks.
Choices: VAR, FIX
•Select “VAR” to adjust the ZONE 2 OUTPUT or ZONE 3 OUTPUT volume simultaneously with VOLUME +/– on the remote control.
•Select “FIX” to fix the ZONE 2 OUTPUT or ZONE 3 OUTPUT volume level to a standard line level.
Zone 2 amplifier ZONE2 AMP
Zone 3 amplifier ZONE3 AMP
Use to select how the ZONE 2 and/or ZONE 3 speakers are amplified.
Choices: EXT, [SP1], [SP2], BOTH
•Select “EXT” if you want to connect your Zone 2 or Zone 3 speakers through an external amplifier connected to the ZONE 2 OUTPUT or ZONE 3 OUTPUT jacks on the rear panel of this unit.
•Select “[SP1]” to use the internal surround amplifier of this unit when you want to connect your Zone 2 or Zone 3 speakers directly to the SP1 speaker terminals on the rear panel of this unit.
•Select “[SP2]” to use the internal surround amplifier of this unit when you want to connect your Zone 2 or Zone 3 speakers directly to the SP2 speaker terminals on the rear panel of this unit.
•Select “BOTH” to use the internal surround and surround back amplifiers of this unit when you want to connect your Zone 2 or Zone 3 speakers directly to both the SP1 and the SP2 speaker terminals on the rear
panel of this unit.
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Notes
•When
•When “BOTH” is selected for “ZONE2 AMP”, only “EXT” can be selected for “ZONE3 AMP”.
•When “BOTH” is selected for “ZONE3 AMP”, only “EXT” can be selected for “ZONE2 AMP”.
•When you set “ZONE2 AMP” or “ZONE3 AMP” to “[SP1]” or “[SP2]” and the corresponding zone is turned on, no sound is output from the surround back speakers.
•When you set “ZONE2 AMP” or “ZONE3 AMP” to “BOTH” and the corresponding zone is turned on, no sound is output from both the surround speakers and the surround back speakers in the main zone.
•When both “ZONE2 AMP” and “ZONE3 AMP” are set to “[SP1]” or “[SP2]” and Zone 2 and Zone 3 are turned on, no sound is output from both the surround speakers and the surround back speakers in the main zone.
•When you use internal amplifiers for Zone 2 or Zone 3, some surround field programs may not work in the same way as when you do not use the internal amplifiers for Zone 2 or Zone 3.
■Dock set G)DOCK SET
G)DOCK SET
.;AUTO
) | ) |
Charge on standby STANDBY CHRG
Use this feature to select whether this unit charges the battery of the stationed iPod or not when this unit is in the standby mode (see page 66).
Choices: AUTO, OFF
•Select “AUTO” to charge the battery of the stationed iPod when this unit is turned on and in the standby mode.
•Select “OFF” to charge the battery of the stationed
iPod only when this unit is turned on.
OPERATION | ADVANCED |
|
|
English