Yamaha RX-V1700 owner manual Presence SP, Cross Over, 02ASUBWOOFER Phase, Priority, 82 En

CUSTOMIZING THIS UNIT (MANUAL SETUP)

Surround back speakers SB L/R SP

Choices: NONE, SMLx1, SMLx2, LRGx1, LRGx2

SMLx1 [

•Select “NONE” (none) if you did not connect surround back speakers. The surround back channel signals are directed to the surround left and right speakers.

•Select “SMLx1” (small x 1) if you have a small surround back speaker that does not reproduce low- frequency signals effectively. The low-frequency signals of the surround back left and right channels are directed to the speakers selected in “LFE/BASS OUT” and the rest of the signals are directed to the surround back left speaker.

•Select “SMLx2” (small x 2) if you have two small surround back speakers that do not reproduce low- frequency signals effectively. The low-frequency signals of the surround back left and right channels are directed to the speakers selected in “LFE/BASS OUT”.

•Select “LRGx1” (large x 1) if you have a large surround back speaker that reproduces low-frequency signals effectively. All the surround back left and right channel signals are directed to the surround back left speaker.

•Select “LRGx2” (large x 2) if you have two large surround back speakers that reproduce low-frequency signals effectively. All the surround back left and right channel signals are directed to the surround back left and right speakers.

Presence speakers PRESENCE SP

Use this feature if you want to use the presence speakers connected to this unit.

Choices: NONE, YES

PRESENCE SP

[

•Select “NONE” (none) if you did not connect presence speakers.

•Select “YES” (yes) if you connected presence speakers and want to use them.

Bass cross over CROSS OVER

Use this feature to select the crossover frequency of all the speakers set to “SML” (or “SMALL”) or to “NONE” in “SPEAKER SET” (see pages 80 and 82). All frequencies below the selected frequency will be sent to the subwoofer or to the speakers set to “LRG” (or “LARGE”) in “SPEAKER SET” (see pages 80 and 82).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

CROSS OVER

;;;80Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

02ASUBWOOFER PHASE

[

•Select “NORMAL” if you do not want to reverse the phase of your subwoofer.

•Select “REVERSE” to reverse the phase of your subwoofer.

Presence/Surround back channel priority

PRIORITY

Use this feature to prioritize either the presence or the surround back speakers when playing sources that contain surround back channel signals using the CINEMA DSP sound field programs.

Choices: PRNS, SB

PRIORITY

PRNS [

•Select “PRNS” to use the presence speakers even when surround back channel signals are input. The signals for the surround back channel will be output from the surround speakers.

•Select “SB” to use the surround back speakers when surround back channel signals are detected in a CINEMA DSP program. The presence channel signals are output from the front speakers.

82 En