Panasonic PT 60LCX63, PT-50LCX63 Adjusting screen position and size, Width, Phase, UV Timing

Adjusting screen position and size

Adjustment Button	Adjustment Details	Note
item
H Position Press ► button. The image moves to the right.

Press ◄ button. The image moves to the left.

V Position Press ► button. The image moves up.

Press ◄ button. The image moves down.

H Width	Press OK	If noise appears on the ends of the	Only JUST mode
	button.	image in Shrink, switch to Enlarge.

(Shrink)	(Enlarge)
If noise appears on the ends of the	Only 4:3 mode
image in Widen, switch to Narrow.	(Except PC
	input)
(Widen)	(Narrow)

V Size	Press ► button. Press to enlarge image vertically		Only ZOOM
			mode
	Press ◄ button. Press to shrink image vertically
H Size	Press ► button. Press to enlarge image horizontally		RGB input
	Press ◄ button. Press to shrink image horizontally
Phase	Press ► button. Adjust in order to remove any picture interference or contour blurring RGB input
	Press ◄ button. which may occur in computer images.
UV Timing	Press OK	With HDMI connection, depending on the signal, the picture may be	HDMI input
	button.	displayed with unnatural colors (as if red and blue are reversed).
		Correct by setting the UV Timing to Invert. (Default is Normal.)

The OVER SCAN menu is added only when a 640 X 480 signal is input from the HDMI Input.

Adjustment Button	ASPECT	Overscan: ON	Overscan: OFF
item		(Normal display.)	(Picture is displayed smaller so it will
			fit on the screen.)

Overscan	Press OK
	button.
	4:3 mode
	(Widen)	(Narrow)
	FULL mode

Advanced Operation

53