Installation
How to connect the RGB IN Terminals
Connecting a PC to RGB IN
COMPUTER
RGB OUT | AUDIO OUT |
Connect a cable which matches the audio output terminal on the computer.
PC audio cable
(M3 stereo mini pin)
Conversion adapter (If necessary)
RGB cable
RGB IN Terminal (D-SUB 15P) Pin Layouts
11 12 13 14 15
6 7 8 9 10
1 2 3 4 5
Connection port view
Notes:
Pin No. | Signal name |
1 | R |
2 | G |
3 | B |
4 | NC |
5 | NC |
6 | Ground for R |
7 | Ground for G |
8 | Ground for B |
NC: Not connected
Pin No. | Signal name |
9 | NC |
10 | Ground |
11 | NC |
12 | NC |
13 | HD/CSYNC |
14 | VD |
15 | NC |
•Some PC models cannot be connected to the set. A conversion adapter is required to use the RGB cable
•The computer shown in the illustration is for example purposes only. Additional equipment and cables shown are not supplied with this set.
•The picture will become dark if an PC signal with a vertical scanning frequency of 62 Hz is input. To obtain the optimum picture quality with the Device Display, a vertical scanning frequency of 60 Hz is recommended.
•Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified frequency range.
•Select the desired RGB input position by pressing the TV/VIDEO button. (P. 37)
•Similar connections are available at the RGB IN 1, 2 Terminals.
22 | For assistance, please call : |
|
