■Connecting an external amplifier
This unit has more than enough power for any home use. However, if you want to add more power to the speaker output or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks.
Notes
•When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.
•The signals output at the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings (see page 50).
•Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
•Adjust the volume level of the subwoofer with the control on the subwoofer (see page 51).
•Some signals may not be output at the SUBWOOFER PRE OUT jack depending on the settings for “SPEAKER SET” (see page 80) and “LFE/BASS OUT” (see page 80).
1 2 3 4
CONNECTIONS
PREPARATION
CENTER
SUB
WOOFER
FRONT
SURROUND SINGLE(SB)
SUR.BACK/
PRESENCE
L
R
PRE OUT
5
1CENTER PRE OUT jack
Center channel output jack.
2FRONT PRE OUT jacks
Front channel output jacks.
3SURROUND PRE OUT jacks
Surround channel output jacks.
4SURROUND BACK/PRESENCE PRE OUT jacks
Surround back or presence channel output jacks. When you only connect one external amplifier for the surround back channel, connect it to the SINGLE (SB) jack.
y
•Set the “SB L/R SP” to “LRGx2”, “LRGx1”, “SMLx2” or “SMLx1” and “PRESENCE SP” to “NONE” (see page 82) to output the surround back channel signals at SURROUND BACK/PRESENCE PRE OUT jacks.
•Set the “PRESENCE SP” to “YES” and “SB L/R SP” to “NONE” (see page 82) to output the presence channel signals at SURROUND BACK/PRESENCE PRE OUT jacks.
5SUBWOOFER PRE OUT jack
Connect a subwoofer with a
English
