
Component interlace/progressive up-conversion
CMPNT I/P
Use this feature to activate or deactivate the analog interlace/progressive conversion of the analog video signals input at the composite video,
•Select “ON” to activate the analog interlace/ progressive
•Select “OFF” to deactivate the analog interlace/ progressive
Notes
•This menu item is not available and hence not visible in the OSD if “V CONV.” is set to “OFF”.
•If your video monitor does not support analog video signals with 480p/576p of resolution, the SET MENU items may not be displayed on your video monitor when “CMPNT I/P” is set to “ON”. Use
HDMI interlace/progressive up-conversion
HDMI I/P
Use this feature to activate or deactivate the HDMI interlace/progressive
Choices: ON, OFF
•Select “ON” to activate the HDMI interlace/ progressive
•Select “OFF” to deactivate the HDMI interlace/ progressive
Notes
•This menu item is not available and hence not visible in the OSD if “V CONV.” is set to “OFF”.
•When analog video signals with 1080i or 720p of resolution are
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Short message display
SHORT MESSAGE
Use this feature to activate or deactivate the short message display function.
Choices: ON, OFF
•Select “ON” to activate the short message display function. The contents of the front panel display appear at the bottom of the screen each time you operate this unit.
•Select “OFF” to deactivate the short message display function.
Note
The short message display does not appear in the following cases:
–when the component video signals with 480p/576p, 720p, 1080i or 1080p resolutions are input
–when HDMI video signals are input
On-screen display time ON SCREEN
Use this feature to set the amount of time to display the iPod menu in the OSD after you perform a certain operation.
Choices: ALWAYS, 10SEC, 30SEC
•Select “ALWAYS” to display the OSD unceasingly during an operation.
•Select “10SEC” to turn off the OSD 10 seconds after you perform a certain operation.
•Select “30SEC” to turn off the OSD 30 seconds after you perform a certain operation.
Front panel display scroll FL SCROLL
Use this feature to set whether to display the information (such as song title or channel name) in the front panel display in a continuous manner or by the first 14 alphanumeric characters after scrolling all characters once when “DOCK” is selected as the input source.
Choices: CONT, ONCE
•Select “CONT” to display the operation status in the front panel display in a continuous manner.
•Select “ONCE” to display the operation status in the front panel display by the first 14 alphanumeric characters after scrolling all characters once.
OPERATION | ADVANCED |
|
|
English