CONNECTIONS
Setting the speaker impedance
CAUTION
If you are to use 6 ohm speakers, set “SPEAKER IMP.” to “6ΩMIN” as follows BEFORE using this unit. 4 ohm speakers can be also used as the front speakers.
PURE DIRECT
VOLUME
CONTROL |
|
|
|
| FM/AM | MEMORY |
|
A/B/C/D/E |
|
|
| MAN'L/AUTO FM | ENHANCER | ||
INPUT |
|
|
| EDIT |
|
|
|
| STRAIGHT |
|
|
| ZONE ON/OFF ZONE CONTROLS | ||
MAIN ZONE |
|
| MULTI ZONE |
|
|
| |
| EFFECT |
|
|
| ZONE 2 | ZONE 3 |
|
ON/OFF | YPAO | SILENT CINEMA | S VIDEO | VIDEO | L AUDIO | OPTICAL | |
PROGRAM | OPTIMIZER | PHONES |
|
| VIDEO AUX |
| |
| MIC |
|
|
| |||
MASTER |
|
|
2,5 | 3 | 2,4 |
1 Make sure this unit is turned off. | ||
See page 31 for details about turning on or off this | ||
unit. |
|
|
2 Press and hold STRAIGHT on the front panel | ||
and then press MASTER ON/OFF inward to | ||
the ON position to turn on this unit. | ||
This unit turns on, and the advanced setup menu | ||
appears in the front panel display. | ||
| While holding |
STRAIGHT | down |
EFFECT | MASTER |
|
3Rotate the PROGRAM selector on the front panel to select “SPEAKER IMP.”.
The following display appears in the front panel display.
PROGRAM
4Press STRAIGHT on the front panel repeatedly to select “6ΩMIN”.
The following display appears in the front panel display.
STRAIGHT
EFFECT
SPEAKER IMP.
6 MIN
5Press MASTER ON/OFF on the front panel to release it outward to the OFF position to save the new setting and turn off this unit.
MASTER
Note
The setting you made is reflected next time you turn on this unit.
SPEAKER IMP.
8 MIN
