Make Busy/Remove Make Busy, Control MakeBusy | Paradyne 3910

COMSPHERE 3900 Series Modems

Make Busy/Remove Make Busy

The Make Busy function forces the modem off-hook so it cannot answer a call. This is often used with PBX systems to permit the busy out of a PBX port for rotary or hunt groups.

WARNING

To prevent violations of FCC and DOC regulations, this function must only be used behind a user's PBX.

To access Make Busy from the Control branch, make the following selections:

Control:

Make_Busy

F1 F2 F3

Press the

key until Make_Busy appears. Select Make Busy.

Make Busy

Command Complete

F1 F2 F3

The modem is now in a forced busy condition. Command Complete appears on the LCD.

To remove the modem from Make Busy mode, press the key once and the RemoveMakeBusy appears.

Control:

RemoveMakeBusy

key until

F1 F2 F3

Press any function key to select RemoveMakeBusy. The message Command Complete appears on the LCD.

3-34

November 1996

3910-A2-GN32-30

Image 68

Paradyne 3910 Make Busy/Remove Make Busy, Control MakeBusy, Make Busy Command Complete, Control RemoveMakeBusy

Contents

Document No -A2-GN32-30 Copyright E 1996 Paradyne Corporation. All rights reserved Warranty, Sales, and Service InformationTrademarks Important Safety Instructions CC DGD D C D CC Table of Contents DCP Configuration Glossary Index List of Figures Optional SDCP, Model 3911 Faceplate, and Optional SDU List of Tables Comsphere 3900 Series Modems Objectives and Reader Assumptions How to Use this ManualPreface Related Documents Overview FeaturesIntroduction Comsphere 391x Series Models Leased Backup ApplicationsMultipoint Applications Standalone Model 3910 4-Wire/2-Wire Modem Carrier-Mounted Model 3911 4-Wire/2-Wire Modem 3911 Government Requirements and Equipment Return United States Comsphere 3900 Series Modems Canada Technical Specifications Technical Specifications for 391x Series Modems DescriptionModel Certification Number See label on modem Leased-Line Modulations Technical Specifications for 391x Series Modems Specifications DescriptionPin D-subminiature connector EIA-232-D/CCITT 100 to 250 Vac, 50 to 60 Hz MNP Class MNPCcitt V.42bis Modem Installation 391x Series Modem Package Model 3910 Modem Installation Customer-Supplied Equipment Connecting Cables to the Model 3910 Modems Model 3910 Rear Panel and Power Supply Model 3910 4-Wire/2-Wire Leased-Line Connection Model 3910 Dial Backup ConnectionModel 3910 Leased Backup Connection DTE Connection Power Supply Connection Modem Power-UpPower On Selftst Passed Network Management System Connection Selecting Factory Configuration Options Using the Diagnostic Control Panel DCP Using AT Commands Type AT Type AT&Fy&Wn Model 3911 Modem Installation Removing and Replacing Model 3910 Modems Installing a Model 3911 Modem Circuit Pack Lock Removing and Replacing Model 3911 Modems DCP Operation Top-Level Menu Status and Operational Messages Diagnostic Control Panels Model 3910 Diagnostic Control Panel Model 3910 DCP Status Indicators Optional SDCP, Model 3911 Faceplate, and Optional SDU Model 3910 and Model 3911 DCP LEDs Label Color Indicates PwrAlrm Diag Diagnostic Control Panel Operation LCD Display Keypad Menu Structure Call Setup Top-Level Menu Status and Operational MessagesTop-Level Menu Status Status Message Indicates Normal Status Message Indicates Dial Backup or Standby MR Modem is operating in Dial Standby modeLeased Backup Call Failure Status Message Indicates Call Failure ContCall Disconnect Firmware AT Command ResetStatus Message Indicates Firmware Result Cont Dial Access Security Messages Dial Access Security Indicates Message Leased19.2 abbb cdd ee ffff Quick Configuration DisplayLeased19.2 Status Configure Status Branch Status Device HS Major Minor Device Health and Status DeviceHSStatus DeviceHS VF Health and Status Messages Type Message Indicates MajorMinor Status Type Message Indicates Dial ThreshSecurity Port SigQual RcvLevelSig/Noise NrEchLvl Identity LSD DTR DSR Tst BackupStatus Identity DTE Backup StatusBackup Line=Pri 4w APLStatusBackup Bkup2wAPL=Good Status Backup Status Screens Possible Inactive/Backup Line ConditionOptions Active Line Record OptionsStatus 29V.33Status Options Record Record Status Display Clear Configure Branch Poll List Branch Poll List Display Clear DisplayLeased19.2 PList Control Clear function does not appear in Remote mode ClearChange Change function does not appear in Remote Add Poll ListChang Active DeletePoll Listyyyyyy Ent Poll List Change Add Poll ListAdd Command Complete Acquire function does not appear in Remote modeAcquire Poll List Add Acquire Leased19.2 Control Test Control BranchPoll ListAcquir Num Acquired yyy Reset Control Speaker ResetSpeaker Speaker Control Off Low Med Data Stream function is not available in Async mode Data Stream Port1 DisableData Stream Port1 Enable Data Stream Eialed Command Complete EIA LEDsControl EIALEDs Eialed Port1CC Make Busy Command Complete Make Busy/Remove Make BusyControl MakeBusy Control RemoveMakeBusy Download Software Service Line/Disconnect Service LineControl ServiceLine Control DownloadCode DwnLoadSoftware CloneRemote Choose DLL Type DCBroadcast Choose DLL Type SCCloneCloning DC Broadcast Remote Clone Remote in Multipoint Configurations DC Clone Results Nxt xxx Pass Choose Address Ent Choose Password Ent yyyyyyyyCloning a Single TMp Remote Choose DLL Type Single Multiple Implementing a Clone Remote Operation MPtCloneResults Nxt xxx Pass Access Disabled Password InvalidIncompat Modulat No Response VF Thresholds Update Control VFThreshUpdateVF Thresholds Edit Save Reset RemClone Status Bank1xxxx/yyyy If you want to modify additional VF thresholds, select Nxt RSL High dBm NxtRefer to -8 for valid VF threshold ranges Save VF Thresh Thd Out of Range Valid Ranges for VF Thresholds Default Values Test Branch Abort Test Abort Self TestAbort Command CompleteSelf Loc Analog Loop Test LocAnalogLoop Rem Digital Loop TestLocal Loop Started TestRemote Loop Started Loc Digital LoopTest RemDigitalLoop TestDigitl Loop Started PatternTest LocDigitalLoop Test Pattern TestPattern BlksErrd=xxxxxxx Sub-Network Health and Status Branch Leased19.2 TestSubHS Sub-network HS Nxt Xxx Yyyyyy Call Setup BranchCall Setup function is not available in TMp Control mode Dial Leased19.2 CallSetupCall Setup Dial Disconnect Disconnect Command Complete DisconnectDialDirectory Nxt DialDirectory01 Off Hook Call Setup Answer Answer Command CompleteAnswer Dial Standby/Return to Dial Call Setup Dial Standby Call Setup ReturntoDial Dial Standby Command Complete Call Setup ChangeDirectoryChange Directory 01 551234 z Nxt 02z Nxt 019W5556789z Nxt Directory Status Does Not Appear in North America Valid Dial Command ModifiersCall Setup DirectoryStatus Number Status Nxt 01Allowed Talk/Data function is not available in TMp Control modeTalk/Data Branch Online19.2 CallSetup Idle19.2 Tlk/Data Security Branch Remote Branch Leased19.2 Security Remote Multipoint tributary modems Select Channel Secondary Prim Data blckd Online14.4 Control ExitRem Status ªStatusº Diagnostic Control Panel Access Frnt Panl Acces GrantDeny DCP Configuration DCP Configuration Process AT Command Configuration Process Choose Function LdEditAreafrm Factory Editing and Saving a Configuration OptionLdEditAreafrm ActivOperating Ld Fact Preset SyncLeased Choose Mode Answer OriginateChoose Function EditSave Edit StrapGroup DTEInterface StrapsWhenDisc Nxt NoChange RemAccssPasswrd Nxt Sav EditArea to ActiveSaved SummaryChoose Function Edit Save Configuration Tables DTE Interface DTE Interface Configuration Options Asyn Parity Bit None Nxt None Even Odd Mark Space DTE Interface Configuration Options DTE Interface Configuration Options DTE Interface Configuration Options DTE Interface Configuration Options DTE Interface Configuration Options TX Clock Source Internal Nxt Internal External RXCLoop Fallback2 Not available for TMp tributaries Primary data can only be extended one link Extend Main Ch. Disable Nxt Disable EnableDTE Dialer DTE Dialer Configuration Options AT Escape Char 043 Asci Nxt 043 Asci CarriageRtn Char 013 Asci Nxt 013 Asci DTE Dialer Configuration Options AT Cmnd Mode Normal Nxt Normal NoERROR NoStrapOrERR Line Dialer Configuration Options Line Dialer Blind Dial Pause 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20sec Line Dialer Configuration Options Line Dialer Configuration Options Line Dialer Configuration Options Dial Line Configuration Options Dial Line V32bis Automode Enable Nxt Enable Disable System V22b Guard Tone Disable Nxt Disable 550Hz 1800Hz Leased Line Configuration Options Leased Line Leased Line Configuration Options V32bis Autorate Enable Nxt Enable Disable Leased Line Configuration Options Leased Line Configuration Options DualLeasedLn Disable Nxt Disable Enable 42/MNP/Buffer 42/MNP/Buffer Configuration Options 42/MNP/Buffer Configuration Options EC Negotiat Bfr Disable Nxt Disable Enable Disab&Switch Flw Cntl of DTE CTStoDTE Nxt CTStoDTE Disable XON/XOFF XON/XOFF XON/XOFF Psthru Disable Nxt Disable Enable Break Buffr Ctl KeepData Nxt KeepData DiscardData BuffrDiscDelay 10sec Nxt 10sec Disable 60sec Test RdcdAsyncBufSiz Disable End Disable EnableTest Configuration Options Test Configuration Options Miscellaneous Configuration Options Misc Miscellaneous Configuration Options Miscellaneous Configuration Options Diag Connection ModemDC Nxt ModemDC Nmscc Disable Security Operating Modes AT Command Set and S-RegistersSwitching Between Data Mode and Online Command Mode Command Guidelines Escape Sequence and Escape Guard Time Numbers Word Description Result CodesResult Codes Result Codes Numbers Word Description AT Command ListAT Command Format ATD9W5551234 391x Series AT Commands DescriptionCommand DCP LCD Sn=r Dial Tone DetectBusy Tone Only displays OK, CONNECT, RING, no Carrier DCP LCD DCP LCD Bert \A3 \C0 \N5 \D0\G0 42bis Compression Configure\Edit\ Disable V42/MNP/BufferRegister List \X0 Register Format 391x Series S-Registers Description DCP LCD DCP LCD DCP LCD DCP LCD DCP LCD = Ascii = Ebcdic DCP LCD DCP LCD DCP LCD DCP LCD DCP LCD DCP LCD Dial Access Security Menu Tree a Status ªStatusº Control SubHS CallSetup Tlk/Data Troubleshooting B Symptom ActionTable B-1 Modem Health Must be configured for 4-wire operation Dial Backup OperationTable B-2 Leased-Line Operation Table B-4 Modem Ð DTE Connection Modem Ð VF Connection Dial Online Operation Table B-5 Modem Ð VF Connection Symptom ActionTable B-6 Pin Assignments C Table C-1 EIA-232-D Pin Assignments Name Signal Circuit Function SourceEIA-232-D Pin Assignments VF Connector Pin Assignments Table C-2 VF Connector Pin Assignments Type of Telco JackLeased Dial RJ11 Pin Auxiliary Cables Not Supplied Position Plug PIN no Figure C-4. Wiring Diagram Ð 25-Pin Crossover Cable Ccitt V.25bis Dialing Commands D and Responses Call Request Commands Call ResponseCall Request with Number Provided CRN Call Request with Stored Memory Address Provided CRS Call Answer Commands Call Connecting CNXDelayed Call Indicator Incoming Call INC Request List of Delayed Numbers RLD Program Normal PRNRequest List of Forbidden Numbers RLF Connect Incoming Call CIC List Delayed Numbers Response LSD Request List of Stored Numbers RLNList Forbidden Numbers Response LSF List Stored Numbers Response LSN Invalid INV Command ResponseValid VAL Call Answer Commands Program CommandList Request List Response Call Connecting Indication Command ResponseValid Command Call Failure Indication Character Ascii Character Table ETable E-1 Ascii Characters Hexadecimal Decimal Control Key 023 024025 026 Ascii Character Table Table E-1 Ascii Characters Hexadecimal Decimal Control Key Default Configuration Options F Table F-1 Factory Default Configuration Options DTE Interface DTE Dialer Line Dialer Leased Line Default Misc Entry Wait Time VF Prompt Type Sample Configuration G Cables Configuration OptionsPoint-to-Point Figure G-2. Sample Configuration Ð Multipoint Multipoint Point-to-Point with Automatic Dial Backup Auto Dial Back Set to Enable Point-to-Point with Network Management Carrier with Network Management Figure G-6. Sample Configuration Ð Extended Multipoint Extended Multipoint Rate at 19.2K Set ports 1, 2, 3, and 4 to Extended Diagnostics 871A Adapter3910 E,G Equipment Feature Part Number Equipment List H Glossary Automatic dial backup Automatic dial standbyAutomatic rate control Backbone network Command mode Configuration areaConfiguration option Connector Constant carrier mode Controlled carrier modeData mode DB-25 connector Dial command modifiers Digital signalError control Dial line Forward Error Extended networkExtended result codes Fallback Leased line LinkLocal analog loopback Long space disconnect Originate mode Phase jitterPower-up self-test Quick Configuration Register Remote loopbackResult code Return to Dial Time Division Multiplexer TDMTMp Top-Level menu Index Index-2 DTE Index-4 Index-5 Index-6 Index-7