Paradyne 3910 Incompat Modulat, No Response, Access Disabled, Password Invalid, No Circuit

DCP Operation

Warning:Download

Abort_Download

F1 F2 F3

At this point, if you do not want to continue this process, abort the transfer by selecting any function key. This returns the modem to the DwnLoadSoftware menu. However, to continue with

the transfer, press the key to display the Reprogram_Remote selection.

Warning:Download

Reprogram_Remote

F1 F2 F3

Press any function key to begin the transfer.

RemClone Status

Establish Remote

F1 F2 F3

The local modem's LCD displays Establish Remote, indicating the modem is attempting to establish a Remote Cloning Download session with the remote modem.

If unsuccessful, the modem remains in the Download Transfer mode. The LCD's top line displays RemClone Failed and the bottom line displays one of the following messages:

Incompat Modulat	The modems are connected, but are using a modulation scheme other
	than V.33, V.32 terbo, V.32bis, V.32, V.29, or TMp.
No Response	The remote modem is not a 3900 Series modem or the connection
	between the two modems is poor.
Access Disabled	The remote modem's Access from Remote configuration is disabled.
Password Invalid	The local and remote modems' passwords do not match. Correct the
	problem and attempt another download from the local modem. If this
	fails, contact your service representative.
No Circuit	There is no connection between the local and remote modem.

After successful establishment of a Remote Cloning Download session, the following screens appear.

RemClone Status

Initializing

F1 F2 F3

3910-A2-GN32-30 November 1996 3-41