DCP Operation

 

 

 

 

 

Table 3-7

 

 

 

 

Backup Status Screens

 

 

 

 

 

Active Line

 

Inactive Line

 

Possible Inactive/Backup Line Condition

1st Screen Display

2nd Screen Display

 

 

 

 

 

 

 

Line=Pri 4w APL

Bckup:2wAPL=XXXX

 

Good indicates that line continuity is detected.

or

or

 

 

 

 

Bad indicates that line continuity is not detected.

Line=Pri 2w APL

Bckup : Dial

=(blank)

 

???? indicates that the line condition is unknown

 

 

 

 

 

 

(Backup Facility Check is making its first

 

 

 

 

 

 

determination of the line conditions since the last

 

 

 

 

 

 

retrain).

 

 

 

 

 

 

blank indicates that the Backup Line Check option is

 

 

 

 

 

 

disabled.

 

 

 

 

 

 

 

Line=Bkup 2w APL

Pri

4w

APL

=XXXX

 

Good indicates the line condition is good.

or

or

 

 

 

 

Bad indicates the line condition is bad.

Line = Dial Backup

Pri

2w

APL

=XXXX

 

???? indicates the line condition is unknown (Lease

 

 

 

 

 

 

Lookback has not had enough time to make an initial

 

 

 

 

 

 

appraisal of the line conditions since the last retrain).

 

 

 

 

 

 

blank indicates the Lease Lookback option is

 

 

 

 

 

 

disabled.

 

 

 

 

Line=Dial Only

No second screen

 

NOTE: When the modem is configured for Dial Only,

 

display.

 

 

 

there is no backup.

 

 

 

 

 

 

NOTE: The leased-line interface is disabled when the

 

 

 

 

 

 

factory default options are loaded from the

 

 

 

 

 

 

Async Dial, Sync Dial, or UNIX Dial

 

 

 

 

 

 

templates.

 

 

 

 

Line=No Sync

No second screen

 

NOTE: No Sync appears when the modem is not

 

display.

 

 

 

trained on either the primary or backup line

 

 

 

 

 

 

facility.

 

 

 

 

 

 

 

To exit this function and remain in the Status branch, press the key. To exit and return to the

Top-Level menu, press the key.

Options

The Options Status function displays all optional firmware features currently installed in the modem. If no firmware options are installed, None_Installed appears on the LCD.

To access Options from the Status branch, make the following sections:

Status:

 

 

DTE

 

Options

F1

F2

F3

Press the

key until Options appears. Select Options.

3910-A2-GN32-30

November 1996

3-23

Page 57
Image 57
Paradyne 3910 operation manual Options, Backup Status Screens, Active Line, Possible Inactive/Backup Line Condition