Paradyne 3910 Cloning a Single TMp Remote Choose DLL Type Single Multiple, Choose Address Ent

DCP Operation

•For Multiple download configurations, ensure that the control modem's active poll list contains all the network management addresses for the remote tributary modems that will receive the download (refer to the Poll List section in this chapter), and ensure that the tributaries are responding properly to polls (refer to the Sub-Network Health and Status Branch section in this chapter).

Cloning a Single TMp Remote

Choose DLL Type >

Single Multiple

F1 F2 F3

Press the F1 key to select Single Clone Remote.

Choose Address:

Ent ￿xxx

F1 F2 F3

The address field (xxx) displays the network management address of the modem that will receive the download. The valid address field range is from 001 to 256.

To increment digits within the address field (xxx), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 (￿) key to increment the digit.

Press Enter (Ent) to select the modem that will receive the download.

Choose Password:

Ent ￿yyyyyyyy

F1 F2 F3

The password field (yyyyyyyy) displays the remote access password for the modem that will receive the download.

To increment digits within the password field (yyyyyyyy), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 ( ￿ ) key to increment the digit.

Press Enter (Ent) to select the modem that will receive the download.

After completing these actions, proceed to the section titled Implementing a Clone Remote

Operation.

3910-A2-GN32-30 November 1996 3-39