Paradyne 3910 operation manual Leased19.2 Security Remote, Multipoint tributary modems

COMSPHERE 3900 Series Modems

NOTE

When initiating a Remote function from a TMp tributary modem, primary channel operation is not available. Also, if the tributary modem is not on the control modem's poll list, the error message No Trib Session appears when the function is executed.

To access the Remote branch, make the following selections:

Press the

Leased:19.2 <

Security Remote

F1 F2 F3

key until Remote appears. Select Remote.

NOTE

If a connection is not established between a local 3900 Series modem and a remote 3900 Series modem, the LCD displays Remote Mode Fail-No Circuit. Return to the Top-Level menu.

For Trellis Multipoint (TMp) control modems, you must specify the network management address of a tributary modem. The following display does not appear in point-to-point or Trellis

Multipoint tributary modems.

Choose Address:

Ent ￿xxx

F1 F2 F3

The address field (xxx) displays the network management address of the modem to be accessed by the Remote function. The valid address field range is from 001 to 256.

To increment digits within the address field (xxx), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 ( ￿ ) key to increment the digit.

Press Enter (Ent) to select the modem that will be accessed by the Remote function.

3-66 November 1996 3910-A2-GN32-30