Paradyne 3910 operation manual Dcp Lcd

COMSPHERE 3900 Series Modems

Table 5-4

(8 of 13)

391x Series S-Registers

S-Register		Description	DCP LCD
			Command
			Sequence
S66	NMS Call Messages. Register determines if the modem sends		Configure\Edit\
	information regarding status (Call Progress) and/or sends summarized		Misc
	call statistics (Call Connect) to the 6700 Series Network Management
	System (NMS).
	Register has the following values:
	0	= Call Connect & Progress
	1	= Disable
	2	= Call Connect Only
	3	= Call Progress Only
	The factory setting is Call Connect & Progress.
S67	Directory Location 1 Callback. Register determines if the modem uses		Configure\Edit\
	the single number callback function.		Misc
	Register has the following values:
	0	= Disable
	1	= Enable
	The factory setting is Disable.
S69	Make Busy Via DTR. Register determines if the modem goes off-hook		Configure\Edit\
	(busy) when DTR is OFF.		Line Dialer
	Register has the following values:
	0	= Disable
	1	= Enable
	The factory setting is Disable.
S70	V.27bis Train. Register controls the train time for V.27bis operation.		Configure\Edit\
	Register has the following values:		Leased Line
	0	= Short
	1	= Long
	The factory setting is Short.
S71	XTXC Clamps TXC. Register allows the modem's TXC output to be		Configure\Edit\
	clamped off when TX Clock Source is configured for External.		DTE Interface
	Register has the following values:
	0	= Enable
	1	= Disable
	The factory setting is Enable.

5-22 November 1996 3910-A2-GN32-30