Paradyne 3910 operation manual DCP Configuration Process

COMSPHERE 3900 Series Modems

NOTE

If you are using AT commands, a period of time can exist in which the contents of Active (Operating) and Active (Saved) differ. Once you issue an AT&W0 (write) command, however, the two storage areas are identical.

Figures 4-1 and 4-2 graphically display the interaction between the edit area and configuration areas as viewed from the perspective of the DCP and the AT command set.

CONTENTS OF Active (Saved) ARE AUTOMATICALLY COPIED

TO Active (Operating) WHEN A SAVE IS COMMANDED VIA THE

DCP, ON A RESET, OR ON POWER-UP.

Active (Operating) Active (Saved) Customer1 Customer2 Factory

S Sync Leased (Answer/Originate)

S Async Leased (Answer/Originate)

S TMp (Control/Trib)

S Async Dial

S Sync Dial

S UNIX Dial

Load Edit

Area From

Save

To

EDIT AREA

ALLOWS YOU TO VIEW AND EDIT CONFIGURATION OPTIONS

ANY CHANGES MADE TO

CONFIGURATION OPTIONS

ARE SAVED TO Active (Saved),

Customer1, OR Customer2

Figure 4-1. DCP Configuration Process

4-2 November 1996 3910-A2-GN32-30