Paradyne 3910 operation manual Status ªStatusº

COMSPHERE 3900 Series Modems

Status

ªStatusº

Configure PList Control Test SubHS Call_Setup ExitRem

The Top-Level menu of the remote 391x Series modem is similar to the local 391x Series modem with the following exceptions:

•The Talk/Data and Security branches do not appear.

•Change Directory is the only function available under the Call Setup branch.

•Local Analog Loop and Remote Digital Loop do not appear under the Test branch when using the secondary channel. When using the primary channel, the Test branch does not appear.

•Poll List Display is the only function available under the PList branch.

•Exit Remote replaces Remote on the local modem's LCD.

To return to local modem operation, select ExitRem. Any changes made to configuration options in the remote modem are saved.

The following conditions can cause Remote branch access to fail:

•The local modem is not able to communicate with the remote modem because of a poor dial network or leased-line connection, or the remote modem is not a 3900 Series modem. If this is the case, the status message No Response appears on the LCD.

•If a connection is established but the remote modem's Access from Remote configuration option is disabled, then the status message Access Disabled appears on the LCD.

•If a connection is established but the wrong password is stored, the status message Password Invalid appears on the LCD. This configuration option must be enabled by the remote user. (Refer to the Remote Access Password configuration option in Chapter 4.)

•The Remote mode command displays Other Test Active if an Analog Loopback test is currently running.

3-68 November 1996 3910-A2-GN32-30