Paradyne 3910 Select Channel Secondary Prim Data blckd, Online14.4 Control ExitRem

DCP Operation

For Trellis Multipoint (TMp) modems (control or tributary), you must specify the remote access password of the modem that will be accessed by the Remote function. The following display does not appear in point-to-point modems.

Choose Password:

Ent ￿yyyyyyyy

F1 F2 F3

The password field (yyyyyyyy) displays the remote access password of the modem to be accessed by the Remote function.

To increment digits within the password field (yyyyyyyy), use the and keys to position the cursor ( _ ) under the digit that will be incremented. Press the F2 ( ￿ ) key to increment the digit.

Press Enter (Ent) to select the modem that will be accessed by the Remote function.

Select	Channel	>
Secondary
F1	F2	F3

or

Select Channel		<
Prim	(data blckd)
F1	F2	F3

If operation over the secondary channel is desired, press any function key to select the secondary channel. Secondary channel only appears if using V.32 terbo, V.32bis, V.32 or TMp

modulation. If operation over the primary channel is desired, press the key until primary displays and press any function key. Primary channel operation is not available when initiating a Remote function from a TMp tributary modem.

Online:14.4

Control ExitRem

F1 F2 F3

If the remote modem accepts the password and the entry is successful, the Top-Level menu of the

remote modem appears on the local modem's LCD. An appears in the upper right-hand corner indicating that what is displayed on your LCD is actually the Top-Level menu of the remote 391x Series modem. If the message Remote FP Busy appears, the remote modem's front panel is already in Remote mode.

3910-A2-GN32-30 November 1996 3-67