DCP Operation

VF

VF displays the condition of the leased or dial connection.

To access VF from the Status branch, make the following selection:

Status:>

DeviceHS VF

F1 F2 F3

Select VF.

Status:VF>

SigQual=Excelent

F1 F2 F3

If the modem is receiving a signal, the signal quality appears on the LCD's bottom line. Press the key to scroll and view the receive signal level, signal-to-noise ratio, near end echo level, far end echo level, far end echo delay, and echo frequency offset. If the modem is not receiving a signal, the message No Signal appears on the LCD.

SigQual

Signal Quality displays the condition of the VF line. Possible values are

 

Excelent (Excellent), Good, Fair, Poor, or No Signal. These values appear

 

for V.32 terbo, V.32bis, and V.32 modulations.

RcvLevel

Receive Signal Level displays, in decibels referenced to one milliwatt

 

(dBm), the actual strength of the incoming signal. This value appears for

 

V.32 terbo, V.32bis, V.32, and Trellis Multipoint modulations.

Sig/Noise

Signal-to-Noise Ratio displays, in decibels, the receive signal strength

 

relative to noise on the line. This value appears for V.32 terbo, V.32bis, V.32,

 

and Trellis Multipoint modulations.

NrEchLvl

Near End Echo Level displays the signal level, in decibels referenced to one

 

milliwatt (dBm), of that portion of the transmit signal which has been

 

echoed back by the local line termination. This value appears for

 

V.32 terbo, V.32bis, and V.32 modulations.

FarEchLvl

Far End Echo Level displays the signal level, in decibels referenced to one

 

milliwatt (dBm), of that portion of the transmit signal which has been

 

echoed back by the remote line termination. This value appears for

 

V.32 terbo, V.32bis, and V.32 modulations.

FarEchDel

Far End Echo Delay displays the roundtrip delay in milliseconds of the far

 

end echo. This value appears for V.32 terbo, V.32bis, and

 

V.32 modulations.

EchoFreqOff

Echo Frequency Offset displays the frequency offset of the far end echo.

 

This value appears for V.32 terbo, V.32bis, and V.32 modulations.

3910-A2-GN32-30

November 1996

3-19

Page 53
Image 53
Paradyne 3910 operation manual SigQual, RcvLevel, Sig/Noise, NrEchLvl, FarEchLvl, FarEchDel, EchoFreqOff