Paradyne 3910 operation manual Leased19.2 CallSetup, Call Setup Dial Disconnect

DCP Operation

ªStatusº

Status

Configure

PList

Control

Test

(Dial Backup only)

SubHS

Call_Setup

Tlk/Data

Security

Remote

Dial	Disconnect	Answer	Dial_Standby	Change_Directory Directory_Status
			or	(Does not appear
			Return_to_Dial
				in North America)

Directory Locations 1 - 24

To access the Call Setup branch from the Top-Level menu, make the following selections:

Leased:19.2

Call_Setup

F1 F2 F3

Press the

key until Call_Setup appears. Select Call_Setup.

Dial

For dial backup applications, Dial allows you to dial any telephone number stored in directory locations 1±24. Any telephone number dialed using the DCP must already exist in a directory location. Refer to Change Directory for information on storing telephone numbers in directory locations.

For leased backup applications, Dial allows you to switch to the backup leased line. Any directory location may be used. The remote modem cannot automatically answer the simulated call. Use the Answer function of the remote modem in conjunction with the Dial function to manually switch to the backup leased line.

To access Dial from the Call Setup branch, make the following selection:

Call	Setup:	>
Dial	Disconnect
F1	F2	F3

Select Dial to display the first directory telephone number.

3910-A2-GN32-30 November 1996 3-55