Paradyne 3910 Clear function does not appear in Remote mode, Poll List Clear Change

DCP Operation

If there are modems in the poll list when you select Display,

xxx Displays the network management address of the modem in the poll list.

yyyyyyDisplays either Active or Skip to indicate the poll list in which the network management address is included.

Select Nxt to scroll through the entries in the Active or Skip poll lists.

To exit this function and remain in the PList Display branch, press the key. To exit and return

to the Top-Level menu, press the key.

Clear

The Clear function does not appear in Remote mode.

Clear deletes the modem's poll list.

To access Clear from the PList branch, make the following selection:

Poll List:		>
Display		Clear
F1	F2	F3

Select Clear.

The message Command Complete appears on the second line of the LCD to indicate that the poll list has been cleared.

To exit this function and remain in the PList branch, press the key. To exit and return to the

Top-Level menu, press the key.

Change

The Change function does not appear in Remote.

Change allows you to change the modem's poll list.

To access Change from the PList branch, make the following selections:

Poll	List:
Clear		Change
F1	F2	F3

Press the

key until Change appears. Select Change.

Change allows you to add modems to the Active poll list (Active), delete modems from both Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.

3910-A2-GN32-30 November 1996 3-27