Paradyne 3910 Status Message Indicates Call Failure, Cont, Call Disconnect, Firmware, Download

DCP Operation

		Table 3-3
		(3 of 4)
		Top-Level Menu Status
Status	Message	Indicates
Call Failure	No Dial±DTR	The modem cannot dial because DTR is OFF.
Cont.
	No Dial±Test	The modem cannot dial because it is running a Test.
	No Dial Tone	The modem has aborted the call because it cannot detect a dial
		tone.
	No Quiet	The modem has detected No Quiet Answer (@) before the time-out
	Answer	setting of the No Answer Disconnect configuration option.
	Ringback	The answering modem did not answer within the time limit specified
	Timeout	by the No Answer Timeout configuration option. A ringback signal
		was detected.
	Trunk Busy	The modem is receiving a fast (trunk) busy.
	Wrong Call	The call was answered, but not by a modem. No answer tone.
Call Disconnect	ATH Disconnect	The modem has disconnected due to an ATH command.
	Bad Lines Disc	The modem has disconnected because the lines do not support the
		modulation and/or data rate selected.
	No Carrier Disc	The modem disconnects due to the loss of carrier signal from the
		remote modem.
	DTR	The modem has disconnected due to the loss of DTR from the DTE.
	Disconnect
	EC Disconnect	The modem has disconnected due to failure to negotiate Error
		Control mode.
	Inv Rate Disc	When using V.32bis modulation, the remote modem does not
		support the data rate used by the local modem.
	LnCurrnt Disc	The modem has disconnected due to the loss of line current.
	LongSpace	The modem has disconnected due to the detection of a long space.
	Disc
	NoData Disc	The modem has disconnected due to a lack of transmitted and
		received data.
	Disconnecting	The modem has begun the disconnect sequence.
	RmtCmnded	The modem has disconnected due to a V.32 Cleardown received
	Disc	from the remote modem.
	Talk Mode	The modem is in Talk mode.
Firmware	DownldOnly	A local download of firmware or a remote cloning of firmware has
Download	Mode	failed. The modem is currently in a Download Only mode in which
Result		only another download attempt is possible.
	Frmware	A local download of firmware or a remote cloning of firmware was
	Upgrade	successful.
	RemClone	A remote cloning of firmware has failed. This message appears on
	Failed	the local modem's LCD.

3910-A2-GN32-30 November 1996 3-11