Paradyne 3910 operation manual Point-to-Point with Network Management

Sample Configuration

Point-to-Point with Network Management

Figure G-4 shows a sample configuration for point-to-point applications with network management.

	19200(V32t)		19200(V32t)
	TX		Leased	TX
DTE	3910 A				DTE
			3910	B
(Sync)					(Sync)
	NMS
Cable 1	3600-	Cable 2	Cable 2		Cable 1
	F3-
	300

CCHubbing

IN Device

Cable 4

NMS

(6700

or

6800)

Adapter

(002-0025-0031)

Figure G-4. Sample Configuration Ð Point-to-Point with Network Management

Configuration Options

3910 A Use Sync Leased (Answer) default configuration options.

3910 B Use Sync Leased (Originate) default configuration options.

Cables

Cable 1 Use a standard, customer-supplied, EIA-232-D/V.24 cable with a DB-25-P (plug) connector at one end to attach to the modem. Attach this to the connector labeled DTE1.

Cable 2 Use part number 125-0053-1431 (an 8-position, 8-wire modular cord that is supplied with the modem). Attach this to the connector labeled LEASED.

Cable 4 Use part number 835-1224-1011 (10 feet), part number 125-0040-0031 (12 feet), part number 835-1224-2511 (25 feet), part number 835-1224-5011 (50 feet), or an equivalent pin-to-pin 6-position, 6-wire modular cord. The maximum cable length is 50 feet.

3910-A2-GN32-30 November 1996 G-5