COMSPHERE 3900 Series Modems

To access Backup from the Status branch, make the following selection:

Press the

key until Backup appears.

Status:

 

 

DTE

 

Backup

F1

F2

F3

Select Backup.

Status:Backup >

Line=Pri 4w APL

F1 F2 F3

The configuration of the current operating line facility (either APL primary or backup) appears (Refer to Table 3-7).

Press the

key to display the next screen.

Status:Backup <

Bkup:2wAPL=Good

F1 F2 F3

This screen displays the configuration and condition of the inactive line facility (either APL primary or backup).

There are four condition codes, Good, Bad, ????, and ` ' (blank).

Table 3-7 provides information about the Status Backup screens. The first column lists all possible configurations for the modem's currently active line. The second column lists all possible configurations for the modem's inactive lines. The third column provides information about the inactive line condition.

XXXX represents the condition code of the inactive line.

3-22

November 1996

3910-A2-GN32-30

Page 56
Image 56
Paradyne 3910 operation manual StatusBackup Line=Pri 4w APL, StatusBackup Bkup2wAPL=Good