Paradyne 3910 operation manual Sn=r

AT Command Set and S-Registers

Table 5-2

(3 of 3)

391x Series AT Commands

AT	Description	DCP LCD
		Command
Command
		Sequence
O	Return to Online or Data Mode. Returns modem to Data mode from	None
	Online Command mode.
P	Pulse Dial. Sets the modem for Pulse Dial mode.	Configure\Edit\
		Line Dialer
	NOTE: Pulse Mode is disabled in Denmark and Sweden.
	Table 5-3
	(1 of 8)
	391x Series AT Commands
AT	Description	DCP LCD
		Command
Command
		Sequence
Qn	Result Codes.	Configure\Edit\
	Q0 Enables modem to send result codes to the DTE.	DTE Dialer
	Q1 Disables modem from sending result codes to the DTE.
	Q2 Enables in Originate mode only for modem to send result codes to
	the DTE. Required for most UNIXr applications.
Sn=r	Change S-Register. Changes contents of S-Register (where n is the	None
	S-Register, and r is the new value).
Sn?	Display S-Register. Displays value of S-Register where n is the	None
	S-Register number.
T	Tone Dial. Sets the modem for tone dial mode.	Configure\Edit\
		Line Dialer
Vn	Result Codes Format.	Configure\Edit\
	V0 Displays result codes in Number (1) format (digits).	DTE Dialer
	V1 Displays result codes as text.
	V2 Displays result codes in Number (2) format (digits).

3910-A2-GN32-30 November 1996 5-7