Paradyne 3910 operation manual Circuit Pack Lock

Modem Installation

5.Press the modem.

Select

key to place the SDCP in direct communication with the selected

The LCD displays the Top-Level menu for the selected modem. In addition, the Front Panel LED on the modem's faceplate and the OK LED on the SDCP light.

6.Once you have determined that the modem is installed properly and completed its power-up self-test, rotate the circuit pack lock until it covers the faceplate latch (Figure 2-3) and tighten the retention screw on the circuit pack lock. This prevents the modem from accidently being removed once it is installed in a carrier.

7.Configure the modem as described in the Selecting Factory Configuration Options section earlier in this chapter.

Figure 2-3. Circuit Pack Lock

3910-A2-GN32-30 November 1996 2-11