PREPARING FOR OPERATION IN WATER MODE

Once the appliance has been installed following the instructions above, it is ready for use. However, its efficiency can be enhan- ced by operating it in the exclusive De'Longhi water mode. The water in the tank increases the cooling power of your Pinguino and at the same time reduces noise levels and electrical con- sumption. Compared to air, water reduces the temperature of the cooling circuit much more efficiently, before being given off from the air exhaust hose in the form of vapour.

Remember that:

•You must always use salt-free tap water.

•The length of time the water in the tank lasts depends greatly on environmental conditions such as temperature, humidity, insulation, the exposure of the room, the number of people present, etc. Indicatively it lasts about six hours. By using the WATERSAVE function (see page 13), the length of time can be

extended to 10 hours, with a slightly lower cooling power and efficiency.

• When the water in the tank runs out, the light comes on and operation of the appliance switches automatically to air to air operation. At the same time, the quantity of air given out from the rear hose increases.

FILLING THE TANK

You can fill the tank in one of two ways:

1) By using the water jug provided:

Use the water jug provided or any other plastic/glass bottle or watering can, providing the neck of the bottle or watering can is narrow enough to enter the filling hole to avoid spilling water on the appliance.

•Without using force, open the water fill door (J) completely, then remove the rubber cap (fig. 12).

•Pour the water into the tank (fig. 13). When the tank is full, the water level window (fig.14) becomes completely red. Indicatively, you will need to refill the jug three times to fill the tank completely.

•After filling, put the rubber cap back in place, then close the door.

2) Using the extendible hose:

•Without using force, open the water fill door (J) completely, then remove the rubber cap (fig. 12). Pull out the extendible hose (fig. 15) and place near a tap.

•Fill the tank to the required level.

•When the tank is full, the water level window (fig. 14) beco- mes completely.

•After filling, put the rubber cap back in place, then close the door.

12

13

14

Level

window

15

✔The tank does not have to be full to use the water function, but the length of time the appliance will operate in water mode will be shorter.

✔When the level window has become completely red, do not add further water or it could overflow. The tank has no overflow prevention system.

7

Page 6 Page 8
Page 7
Image 7
DeLonghi PAC W130E specifications Preparing for Operation in Water Mode, Window
Page 6 Page 8

PAC W130E specifications

The DeLonghi PAC W130E is an innovative portable air conditioning unit designed to deliver optimal comfort in various spaces. Whether it’s a bedroom, living room, or office, this unit combines stylish design with impressive performance, making it a favorite among consumers seeking effective cooling solutions.

One of the standout features of the PAC W130E is its cooling capacity of 13,000 BTU, making it suitable for areas up to 500 square feet. This powerful air conditioner can swiftly lower the temperature, providing relief on hot summer days. The unit also boasts a dehumidification function, which can remove up to 31 pints of moisture per day, effectively reducing humidity levels and improving overall indoor air quality.

The PAC W130E incorporates advanced technologies that enhance its usability and efficiency. The Eco Real Feel technology is a notable addition, which not only cools the air but also maintains the right balance of humidity, ensuring a comfortable environment. This feature allows the unit to adapt its cooling output in response to the ambient conditions, optimizing energy consumption.

The air conditioning unit is designed with user convenience in mind. It features a digital display and an intuitive control panel that allows users to easily set their preferred temperature and mode. Additionally, the remote control feature provides the convenience of adjusting settings from a distance, adding to the unit's overall ease of use.

Another impressive characteristic of the PAC W130E is its mobile design. The built-in wheels make it easy to move the unit from room to room as needed. Furthermore, the installation process is straightforward, requiring no permanent modifications to your living space. The included window kit allows for quick setup, ensuring that you can enjoy cool air without hassle.

In terms of energy efficiency, the PAC W130E is equipped with an energy-saving mode, which helps to minimize power consumption while still delivering adequate cooling performance. With its eco-friendly refrigerant, this unit aligns with modern sustainability standards, appealing to environmentally conscious consumers.

Overall, the DeLonghi PAC W130E is a powerful, efficient, and user-friendly portable air conditioning solution that stands out in the market. With its robust features, advanced technologies, and stylish design, it is well-suited to meet the cooling needs of diverse living and working environments.
Top Page Image Contents