DeLonghi PAC W130E specifications Using The Remote Control Unit

Models: PAC W130E

1 20
Download 20 pages 51.91 Kb
Page 12
Image 12
USING THE REMOTE CONTROL

INSERTING OR REPLACING THE BATTERIES

Remove the back cover of the remote control (fig. 21);

Insert two R03 “AAA” 1.5V batteries, making sure they are in the correct position (see the instructions inside the battery compartment);

Replace the cover.

If the remote control is replaced or discarded, the batteries must be removed and disposed of in accordance with cur- rent legislation as they are harmful to the environment.

Warning: do not mix old and new batteries. Do not mix alka- line, standard (carbon-zinc) or rechargeable (nickel-cad- mium) batteries. Do not dispose of batteries in fire. Batteries may explode or leak.

If the remote control is not be used for a certain length of time, remove the batteries.

SETTING THE TIME

21

After having inserted the batteries, the clock on the display flashes until the time is set. Proceed as follows.

Press the Manual background or Manual background button until the correct time is reached. Hold the button down to run rapidly through first the minutes, then the tens of minutes and then the hours.

Once the correct time has been reached, release the button and press the OK button (23)

to confirm.

 

 

 

 

 

 

 

 

 

• To cancel the settings programmed

 

 

 

 

 

 

 

 

 

 

 

22

 

 

 

 

 

 

 

 

on the remote control and restore the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

original settings, press the RESET (20)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

button lightly with the point of a pen-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

cil or pen.

 

 

 

 

 

 

 

 

 

USING THE REMOTE CONTROL

UNIT

The buttons below the remote control dis-

play are the same as those on the control panel of the appliance. You should, therefore, refer to the instruc-

tions in the section "Operating from the control panel" to turn the 23 appliance on and select the operating mode (AIR CONDITIO- NING, DEHUMIDIFYING, FAN, or SMART) and the fan speed.

The following section describes the additional functions correspon- ding to the controls on the bottom part of the remote control.

 

 

 

BOOST FUNCTION (FIG. 23)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ideal for the summer to cool rooms rapidly. Activate by simply

 

 

 

 

 

 

pressing the

button. The appliance operates in air conditio-

 

 

 

 

 

 

 

 

 

 

 

 

ning mode at maximum fan speed. While this function is selec-

24

 

 

 

 

 

 

 

 

 

 

ted, it is not possible to set the temperature or change fan speed.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SELECTING THE TEMPERATURE SCALE (FIG. 24)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Press the

button to switch the displayed temperature scale

 

 

 

 

 

 

from Celsius to Fahrenheit and vice-versa.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

Page 12
Image 12
DeLonghi PAC W130E specifications Using The Remote Control Unit