Paradyne 3910 Data Stream function is not available in Async mode, Control DataStream

COMSPHERE 3900 Series Modems

To access Reset from the Control branch, make the following selection:

Control:>

Speaker Reset

F1 F2 F3

Select Reset.

The message Reset appears momentarily before the modem performs the power-up diagnostic test sequence.

Data Stream

The Data Stream function is not available in Async mode.

Use Data Stream to enable or disable the modem's data transmitter function.

To access Data Stream from the Control branch, make the following selections:

Control:

Data_Stream

F1 F2 F3

Press the

key until Data_Stream appears. Select Data_Stream.

The Data Stream action which is available (Disable or Enable) appears on the second line of the LCD beside the word Port1. If the modem's data transmitter is enabled, the word Disable appears to indicated that you may disable the data transmitter by selecting this action.

Data Stream

Port1 Disable

F1 F2 F3

If you want to disable the modem's data stream, press the F2 key. When the message Command

Complete appears, press the key to clear the message.

Data Stream

Port1 Enable

F1 F2 F3

Press the F2 key again to enable the modem's data stream.

3-32 November 1996 3910-A2-GN32-30