Paradyne 3910 operation manual EIA LEDs, Control EIALEDs, Eialed Port1CC, Eialed Command Complete

DCP Operation

To exit this function and remain in the Control branch, press the key. To exit and return to the

Top-Level menu, press the key.

EIA LEDs

Use the EIA LEDs function to change the port that controls the front panel LEDs. This function allows the front panel EIA LEDs to display the activity of a selected digital interface.

To access EIA LEDs from the Control branch, make the following selections:

Control:

EIA_LEDs

F1 F2 F3

Press the

key until EIA_LEDs appears. Select EIA_LEDs.

EIA_LED : xxxxx

Port1CC

F1 F2 F3

Press the F1 key until the appropriate digital interface appears.

The xxxxx field displays the currently selected interface. The valid interfaces are Port1, and depending on the configuration option, either CC (NMS Control Channel), or DC (Diagnostic Channel). Refer to the section Miscellaneous Configuration Options, Diag Connection

in Chapter 4.

Select the appropriate interface by pressing the corresponding function key.

EIA_LED : xxxxx

Command Complete

F1 F2 F3

After selecting the desired interface, the message Command Complete appears on the bottom line of the LCD and the selected interface appears in the xxxxx field.

To exit this function and remain in the Control branch, press the key. To exit and return to the

Top-Level menu, press the key.

NOTE

The Port1 interface is the only display allowed on the 3911 modem, therefore, the entire EIA LEDs branch is masked.

3910-A2-GN32-30 November 1996 3-33